Clock Functions - Zanussi ZOHNC2X2 User Manual

Heating function
Moist Fan Bak-
ing

CLOCK FUNCTIONS

CLOCK FUNCTIONS
Clock function
Time of Day
Duration
Minute Minder
HOW TO SET: CLOCK FUNCTIONS
- flashes when you connect the oven to the electrical supply, when there was a power cut or when
the timer is not set.
, - press to set the time.
After approximately 5 sec., the flashing stops and the display shows the time.
Step 1
- press repeatedly to change the time of day.
Step 2
,
After approximately 5 sec., the flashing stops and the display shows the time.
Application
This function is designed to
save energy during cook-
ing. When you use this
function, the temperature in
the cavity may differ from
the set temperature. The
heating power may be re-
duced. For more informa-
tion refer to "Daily Use"
chapter, Notes on: Moist
Fan Baking.
To set, change or check the time of day.
To set how long the oven works.
To set a countdown. This function has no effect on the operation of
the oven. You can set this function at any time, also when the oven
is off.
How to set: Time of Day
How to change: Time of Day
- press to set the time.
NOTES ON: MOIST FAN BAKING
This function was used to comply with the energy
efficiency class and ecodesign requirements
(according to EU 65/2014 and EU 66/2014). Tests
according to:
IEC/EN 60350-1
The oven door should be closed during cooking so
that the function is not interrupted and the oven
operates with the highest energy efficiency
possible.
For the cooking instructions refer to "Hints and tips"
chapter, Moist Fan Baking. For general energy
saving recommendations refer to "Energy
Efficiency" chapter, Energy Saving.
Application
- starts to flash.
9