ViewSonic PJ502 User Manual page 42

Phenomenon
The lens cover is closed.
Remove the lens cover.
The signal cables are not correctly connected.
No pictures are
Correctly connect the connection cables.
displayed.
The brightness is adjusted to an extremely low
level.
Adjust the BRIGHT to a higher level using the
menu function or the remote control.
Color settings are not correctly adjusted.
Perform picture adjustments by changing the
Colors have a
COLOR TINT, COLOR TEMP and/or COLOR
faded-out
SPACE settings, using the menu functions.
appearance, or
Color tone is
COLOR SPACE setting is not suitable.
poor.
Change the COLOR SPACE setting to AUTO,
RGB, SMPTE240, REC709 or REC601.
The brightness and/or contrast are adjusted to
an extremely low level.
Adjust the BRIGHT and/or CONTRAST settings to
a higher level using the menu function.
The WHISPER function is working.
Pictures appear
dark.
Select the NORMAL to the item WHISPER in the
SETUP menu.
The lamp is approaching the end of its product
lifetime.
Replace the lamp.
Either the focus and/or horizontal phase set-
tings are not properly.
Adjust the focus using the focus ring, and/or H
Pictures appear
PHASE using the menu function.
blurry.
The lens is dirty or misty.
Clean the lens by referring to the section "Other
care".
NOTE • Although bright spots or dark spots may appear on the screen, this is a unique char-
acteristic of liquid crystal displays, and such do not constitute or imply a machine defect.
Cases not involving a machine defect Reference page
Part name
Power on/off
Connecting your devices
EASY MENU
PICTURE menu
EASY MENU
PICTURE menu
INPUT menu
INPUT menu
EASY MENU
PICTURE menu
EASY MENU
SETUP menu
Lamp
Adjusting the zoom and
focus IMAGE menu
Other care
ViewSonic PJ502
39