Power Off; Reset To Default - Vivitar DVR-200 User Manual

Power off

If your DV camera is unused for a certain period of time while the camera is powered on, the DV camera will switch
to an idle mode, and eventually turn itself off to conserve power.
Inactivity period (Batteries)
60 seconds
3 minutes
If the camera is idle, re-activate the camera by pressing any button. If the camera has powered-off then you must
turn the camera on again by pressing the
To change the power saving interval, first press the
using the or buttons and then press
Select from [3 Min], [5 Min], [10 Min], [30 Min], [Cancel]

Reset to default

If you wish to restore all camera settings to their original stettings,
select this option and then press the
Then select [ No] or [Yes] by using the
press button to confirm.
OK
Inactivity period (AC Power Adapter)
60 seconds
30 minutes
power button.
button. Then select the power-off interval you prefer by
button to confirm.
OK
button.
or button and then
Camera Status
Stay idle
Shut off
43