Table of Contents
Advertisement
Equipment Required
a. USB storage device
b. Remote Control Unit (ROKU)
Firmware Update Procedure
User Upgrade (Filename example: update.roku)
Upgrade the firmware only. The setting values will not be initialized.
Update procedure
Please use the: Remote Control Unit (ROKU)
1. Turn the power on.
2. Insert the USB storage device to the USB port as
shown below.
Rear Cabinet
(example)
USB port
3. Reset Roku TV.
4. Press the [
] button, Home - Setting - System -
Advanced system settings - Factory reset, enter
into - Factory reset everything.
Ro
u TV
| Factory reset
K
Factory reset everything
Reset TV audio/picture settings
FIRMWARE RENEWAL MODE
USB storage
device
Options
1
2
3
4
5
6
7
8
9
0
OK
Please enter code **** to reset
everything to original factoru
settings and remove all accounts.
5.
Insure TV must connect the network, press the
[
] × 5, [
], [
wifi connect interface.
Wireless
Wired (Ethernet)
Checking connection
" * " differs depending on the models.
Wireless
Update connection
Wired (Ethernet)
Set up new wireless connection
status
connection type
IP address
Wireless MAC address
Signal strength
Wireless channel
6. Enter into Roku update interface, press the [
button × 5, [
] × 4, and [
update interface.
7-1
], [
], [
], and [
] enter into
Network name
*******
Connented
Wireless
***.***.**.**
**:**:**:**:**:**
Excellent
6
] × 1 enter into Roku
PL19.00-A_FW
]
Hide quick links:
Advertisement
Table of Contents
