Philips 32PFL4664/F7 Service Manual page 29

3. How to Attach Adjunctive Equipment
There are no Cell Cushion, etc. attached on the new
Front Cabinet to be replaced with.
Apply adjunctive equipment such as Cell Cushion by
consulting the following, then assemble the Front
Cabinet.
1. Grand Tape (Top side)
Attach the Grand Tape on the top side of the Front
Cabinet.
Front cab
edge
A Grand Tape U is pasted A Grand Tape U is pasted
onto rib which its edge must onto rib which its edge must
over than rib L/R (blue line). over than rib L/R (blue line).
At the concave area, a Grand Tape U At the concave area, a Grand Tape U
Either it starts on left or right Either it starts on left or right
should be pasted and aligned properly should be pasted and aligned properly
no problem. no problem.
following the shape. following the shape.
Exceed Front Cabinet edge Exceed Front Cabinet edge
is NG is NG
2. Grand Tape (Left/ Right)
Attach the Grand Tape on the left and right side of
the Front Cabinet.
A Grand Tape LR is pasted A Grand Tape LR is pasted
starts at top rib and align starts at top rib and align
downward until enter downward until enter
concave area (for Gasket). concave area (for Gasket).
At the concave area, a Grand Tape LR At the concave area, a Grand Tape LR
should be pasted and aligned properly should be pasted and aligned properly
following the shape. following the shape.
Exceed Front Cabinet edge is NG Exceed Front Cabinet edge is NG
3. Gasket
Attach the Gasket over the Grand Tape.
Gasket must be pasted inside designated concave area and Gasket must be pasted inside designated concave area and
must be on a Grand Tape at left and right bottom side. must be on a Grand Tape at left and right bottom side.
Riding on the rib is NG Riding on the rib is NG
Concave area
A Grand Tape U is pasted A Grand Tape U is pasted
onto rib which its edge must onto rib which its edge must
over than rib L/R (blue line). over than rib L/R (blue line).
Either it starts on left or right Either it starts on left or right
no problem. no problem.
Exceed Front Cabinet edge Exceed Front Cabinet edge
is NG is NG
Concave area
A Grand Tape LR is pasted A Grand Tape LR is pasted
starts at top rib and align starts at top rib and align
downward until enter downward until enter
Front cab
concave area (for Gasket). concave area (for Gasket).
edge
4. Cell Cushion (Top side)
Attach the Cell Cushion over the Grand Tape.
A Cell Cushion U is pasted onto rib which starts at blue line. A Cell Cushion U is pasted onto rib which starts at blue line.
Either it starts on left or right no problem. Either it starts on left or right no problem.
Pasting error +/- 2mm Pasting error +/- 2mm
Exceed Front Cabinet edge is NG Exceed Front Cabinet edge is NG
5. Cell Cushion (Left/ Right)
Attach the Cell Cushion over the Grand Tape.
A Cell Cushion LR is pasted A Cell Cushion LR is pasted
onto rib which starts at blue line. onto rib which starts at blue line.
Either pasting starts from top Either pasting starts from top
or bottom is no problem. or bottom is no problem.
Pasting error +/- 2mm Pasting error +/- 2mm
Exceed Front Cabinet edge is NG Exceed Front Cabinet edge is NG
#
CAUTION
When turning over, do not twist the LCD panel
before tightening all screws on the front cabinet.
4-17 PL19.00-B_DC