Menu Operation - ViewSonic PLED-W200 User Manual

Menu operation

The projector has multilingual on-screen display menus that allow you to make image
adjustments and change a variety of settings.
Source
Video/Audio
Setting
Information
*1 It is only available when Color Mode is set to User1 or User 2.
*2 It is only available when Auto Keystone is set to Off.
*3 It is only available under computer mode.
*4 It is only available under video mode.
*5 It is only available when no source is connected.
Computer
Composite
USB
SD Card
Color Mode
Brightness*1
Contrast*1
Color Temp.
Color Setting*1
Red Gain
Green Gain
Blue Gain
Auto Keystone
Keystone*2
Auto, 4:3, 16:9, 16:10
Gamma*1
0 - 4
Frequency*3
-5 - +5
Tracking*3
-6 - +6
H Position*3
-6 - +1
V Position*3
Overscan*4 2% - 10%
Noise Reduction*4 Off, LOW, MID, HIGH
Saturation
Video Setting*4
Sharpness
Tint
0 - 10
Speaker Volume
Mute
Top-Left, Top-Right, Center,
Bottom-Left, Bottom-Right
Front Table, Front Ceiling,
Rear Table, Rear Ceiling
Off, 1-60 Min
High Altitude
5-60 sec.
OSD Transparency Off, 10%~90%
LED Calibration*5
Black, Blue, Gray, Red, Green,
Yellow, Cyan, Magenta, White
Change Password
Password Delete
Off, CC1, CC2, CC3, CC4, T1, T2
-5 - +5
On, Off
Message
Input Source Computer, Composite,
USB, SD Card
LED Hours
LED Hours Reset
Factory Default
23
User, LOW, MID, HIGH
0 - 100
0 - 100
0 - 100
0 - 100
0 - 31
0 - 100