Connection - ViewSonic PLED-W200 User Manual

Connection

Using the AC adapter
The projector must be used with the provided AC adapter. Damage caused by the use
of an incorrect adapter is not covered under the warranty.
1. Insert the plug from the AC adapter into the DC IN terminal.
2. Insert the appropriate end of the power cord into the AC adapter.
3. Insert the plug on the power cord into a wall outlet.
3
Important
• In the connections shown above, some cables may not be included with the projector
(see "Package contents" on page
stores.
• For detailed connection methods, see pages 16-19.
2
6). They are commercially available from electronics
15
1