Specifications - Makita DTD173 Instruction Manual

SPECIFICATIONS

Model:
Fastening capacities
No load speed
Impacts per minute
Rated voltage
Overall length
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Machine screw
Standard bolt
High tensile bolt
Max impact mode
Hard impact mode
Medium impact mode
Soft impact mode
Wood mode
Bolt mode
T mode (1)
T mode (2)
Max impact mode
Hard impact mode
Medium impact mode
Soft impact mode
Wood mode
Bolt mode
T mode (1)
T mode (2)
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
Only for EU countries
Ni-MH
Due to the presence of hazardous com-
Li-ion
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household waste!
In accordance with the European Directive on
waste electrical and electronic equipment and on
accumulators and batteries and waste accumu-
lators and batteries, as well as their adaptation to
national law, waste electrical equipment, batteries
and accumulators should be stored separately
and delivered to a separate collection point for
municipal waste, operating in accordance with the
regulations on environmental protection.
This is indicated by the symbol of the crossed-
out wheeled bin placed on the equipment.
2 ENGLISH
DTD173
M4 - M8
M5 - M16
M5 - M14
-1
0 - 3,600 min
-1
0 - 3,200 min
-1
0 - 2,100 min
-1
0 - 1,100 min
-1
0 - 1,800 min
-1
0 - 3,600 min
-1
0 - 2,900 min
-1
0 - 3,600 min
-1
0 - 3,800 min
-1
0 - 3,600 min
-1
0 - 2,600 min
-1
0 - 1,100 min
-1
0 - 3,800 min
-1
0 - 3,800 min
-
-1
0 - 2,600 min
D.C. 18 V
111 mm
1.2 - 1.5 kg