Table of Contents
Advertisement
<
CONTENTS
3.1
The MX5 is housed in an all steel 1U 19" rack case. In permanent
installations, the MX5 should be rack mounted using the four holes in the
front panel. Additional support may be required for heavy duty road use.
IMPORTANT: THE MAINS LEAD SUPPLIED MUST BE CONNECTED
GREEN/YELLOW
BLUE
BROWN
Mains voltage tolerance ± 10% on each setting.
Fuses type T semi-delay
100-120V 500mA(L)
220-240V 250mA(L)
WARNING: The MX5 controller must always be operated with the
mains safety connected.
This equipment must be earthed.
It should not be necessary to remove any protective earth or signal cable
shield connections.
3.2
MX5 Controllers are supplied with the adjustments set as follows:
Mains voltage
Ground switch
Limiter threshold
Plug-in board
All material © 2007. Martin Audio Ltd. Subject to change without notice.
>
PRINT
MECHANICAL
AS BELOW:
-
-
-
!
RISK OF ELECTRIC SHOCK
DO NOT EXPOSE TO RAIN
INITIAL SETTINGS
240V
On
2V setting
System-specific
Martin Audio – MX5 System Controller
EARTH
NEUTRAL
LIVE
CAUTION
DO NOT OPEN
OR MOISTURE
4
GUIDES
Advertisement
Table of Contents
