Technical Specifications - Martin Audio MX5 Manual

<
CONTENTS
9
MX5
INPUTS
IMPEDANCE
CMRR
CONNECTORS
OUTPUTS
SOURCE IMPEDANCE
MIN LOAD IMPEDANCE
MAX OUTPUT
CONNECTORS
FREQUENCY RESPONSE
DISTORTION+NOISE
SIGNAL+NOISE/
NOISE RATIO
LIMITERS
INDICATORS
PROTECTION
MAINS SUPPLY
MAINS VOLTAGE
MAINS FUSE
DIMENSIONS
WEIGHT
SHIPPING DIMENSIONS
SHIPPING WEIGHT
Due to our policy of continuous product improvement all specifications are
subject to change without notice.
All material © 2007. Martin Audio Ltd. Subject to change without notice.
>
PRINT

TECHNICAL SPECIFICATIONS

2 Electronically Balanced
36K ohms (18K ohms per leg single ended)
67dB @ 10KHz
3 Pin female XLR
4 Electronically Balanced
47 ohms
500 ohms
+20dBu into 500 ohms limiter defeated
3 Pin Male XLR
-3dB @ 25 Hz 24dB/octave
-3dB @ 35KHz 12 dB/octave
(ultimately set by system parameters)
0.009% THD @ 2V output (limiters cancelled)
>97dB @ 2V output 20Hz – 20KHz quasi
peak o/c input
Individual for each channel. With program
related attack times. Ratio 20:1. Threshold
range -12dBu to +12dBu in 16 steps
2-way stereo, 3/4 way-mono LED's. 10 section
LED PPM indicating signal level, threshold and
limit on each band
Auto muting relays and soft start (4 seconds)
IEC mains connector with integral fuse holder
Externally selectable on IEC inlet 100-120-220-
240V AC, 50/60Hz. Voltage tolerance on each
setting ±10%
220-240V: -250mA Type 'T'(L)
100-120V: -500mA Type 'T'(L)
(W) 482mm x (H) 44mm x (D) 211mm
(W) 19ins x (H) 1.75ins x (D) 8.3ins
3.5kg (7.7 lbs)
(W) 530mm x (H) 120mm x (D) 310mm
(W) 21ins x (H) 4.7ins x (D) 12.2ins
4.1kg (9lbs)
Martin Audio – MX5 System Controller
14
GUIDES