Table of Contents
Advertisement
2. Use the
and
power levels from 1 to 9 or enable the
Booster function.
Switching off the cooking zones
1. Select the cooking zone to deactivate.
2. Use the
button to reset the power level
to 0 (zero).
• Hold the
least 2 seconds to switch off all
cooking zones at the same time.
If a vessel not suitable for induction cooking is
used on an active zone or there is no vessel, the
zone will not deliver power and its display will
show the
symbol alternating with the power
level number.
Power level table
The power in the cooking zones can be
adjusted to various levels. In the table below
you will find instructions for the different types of
cooking.
Power level
0
Cooking small amounts of food
from 1 to 2
from 3 to 4
Cooking large quantities of food,
from 5 to 6
from 7 to 8
Roasting, slow frying with flour
9
Bring a large amount of water to
P
the boil (maximum power, see
Booster function
See General safety instructions.
The Booster function allows you to heat a pan at
maximum power for a limited amount of time. It
can be used to bring a large amount of water to
the boil rapidly.
After selecting a zone:
1. Set the power level to 9.
91477A765/A
buttons to select
button down for at
Suitable for:
OFF setting
(minimum power)
Cooking
roasting larger portions
Roasting
"Booster function")
2. Press the
button again; the
The Booster function remains active for
a maximum of 10 minutes, after which
the power level of the zone returns to 9.
will be shown on the display.
To deactivate the Booster function, simply
decrease the power level of the cooking zone
or switch off the appliance.
Timed cooking
This function is used to program the automatic
switch-off of each cooking zone at the end of a
period of time set by the user (from 1 to 99
minutes).
To set a timed cooking:
1. Place a pan on a cooking zone and select
a power level for a zone.
2. Select the relative cooking zone.
3. Select a power level (from 1 to 9).
4. Press the
symbol appears.
5.
will flash between the
buttons.
6. Use the
and
required time; press and hold to advance
more quickly.
7. Press any select cooking zone button or wait
10 seconds to start the timer.
The display of the timed zone now shows the
previously set power level, with a dot at the
lower right.
At the end of the timed cooking, the cooking
zone is switched off;
and beeps are emitted. Press any button to stop
the buzzer.
Modifying or deactivating timed cooking
1. Select a timed zone.
2. Press the zone selection button again to
display the remaining time.
3. Use the
and
reset the countdown. Resetting the
countdown disables timed cooking.
symbol
button, the flashing
and
buttons to select the
flashes on the display
buttons to modify or
USE - 27
Advertisement
Table of Contents
