Table of Contents
Advertisement
Positioning Rain Sensor
Cleaning Your Rain Sensor
•
Leaves, grass, or other debris may need to be removed
periodically from the funnel of your Rain Sensor.
•
Be sure to check inside your Rain Sensor as well. Insects or
dirt can begin to restrict the movement of the Rocker.
•
Unlatch the Locking Tabs on the side of the Rain Sensor to
remove the Funnel. This will allow you to easily clean each
part separately.
Winter Storage Options
•
Remove batteries and store sensor in a safe place.
•
Remove batteries and cover the sensor where mounted.
•
Leave outside, uncovered. While the Rain Sensor cannot
accurately record snowfall, when the snow melts the water
will be counted as rain.
•
The Rain Sensor is self-emptying, so water should not
freeze inside.
•
This Rain Sensor is designed for outdoor use and will
withstand temperatures below freezing.
For Accurate Measurements
•
Mount the Rain Sensor horizontally and ensure it's level.
•
The sensor should be mounted more than 3 feet (91.4 cm)
above ground.
•
Your Rain Sensor needs to be in an open area for accurate
readings.
•
Ensure the base of your Rain Sensor is not in a depression.
•
This sensor has drainage holes in its base that allow it to
self-empty.
•
For more info, watch our sensor mounting video here:
bit.ly/mounting_rain
Funnel
Battery
Compartment
Rocker
Locking Tabs
8
Advertisement
Table of Contents
