Fortinet FortiGate FMC-XD2 Quick Start Manual

FortiGate FMC-XD2
FMC-XD2
ACTIVE
SERVICE
LED Description
LED State
Blue
ACTIVE Flashing Blue
Off
Green
SERVICE
Off
Green
LINK/ACTIVITY
Flashing Green
Interface Description
Interface Type
Ports SFP+ 1 to SFP+ SR
SFP+ 2
Package Contents
Panel screw
SFP+ ports
FMC-XD2
1 (SFP +) 2 (SFP +)
ACTIVE
SERVICE
Link/ Activity
Latch
LEDs
LEDs
© Copyright 2017 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trademarks
of their respective holders.
Regulatory Compliance
FCC Class A Part 15, / CE Mark
09 September 2017
1 (SFP +) 2 (SFP +)
Description
The module is enabled.
The module is sending or receiving data.
The module is disabled.
If the slot is configured as "Auto" or FMC-XD2, the service LED is turned on. This indicates the module is in
service and can be configured.
If slot is configured as "None" or any type other than XD2.
Port is online.
Port is sending or receiving data.
Speed Protocol
10 Gbps/auto Ethernet
Panel screw
QuickStart Guide
Description
Small form-factor pluggable transceiver.
SFP+ Transceivers
x2
QuickStart Guide
FortiGate-30B
FMC-XD2
1 (SFP +) 2 (SFP +)
ACTIVE
SERVICE
REGISTER
Copyright 2017 Fortinet Incorporated. All rights reserved.
Trademarks
01-413-120593-20170907