Advertisement
DESCRIPTION
The Architectural Acoustics MMA™
835T is a high-quality mixer amplifier
with nine separate input channels. Each
channel provides a level control, and
the master output section features bass
and treble EQ controls (defeatable) and
special equalization contour.
The MMA 835T provides unmatched
application flexibility with an array of
optional plug-in modules, allowing each
system to be tailor-made for specialized
installations. Input modules may be
loaded in as required for varying
applications, number of input channels,
special functions, etc.
The program input includes its own
level control and is totally separate from
the other eight channels. External
signals may be patched in at this point
as a system auxiliary input or the ninth
input channel. Signals appearing at this
input are routed directly to the master
summing amplifier stage and are mixed
with signals from the other eight
channels. Systems requiring a single
Peavey Electronics Corporation warrants to the original purchaser of this new Architectural Acoustics product that it is free from
defects in material and workmanship. If within one (1) year from date of purchase a properly installed product proves to be defective and
Peavey is notified, Peavey will repair or replace it at no charge. (Note: Batteries and patch cords not covered.) "Original purchaser" means
the customer for whom the product is originally installed.
Damage resulting from improper installation, interconnection of a unit or system of another manufacturer, accident or unreasonable
use, neglect or any other cause not arising from defects in material and workmanship is not covered by this warranty. The warranty is
valid only as to products purchased and installed in the United States and Canada.
THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE. UNDER NO CIRCUMSTANCES WILL PEAVEY BE
LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGES OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE THE PRODUCT, EVEN IF PEAVEY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THIS LIMITED
WARRANTY IS THE ONLY EXPRESSED WARRANTY ON THIS PRODUCT, AND NO OTHER STATEMENT, REPRESENTATION, WAR-
RANTY, OR AGREEMENT BY ANY PERSON SHALL BE VALID OR BINDING UPON PEAVEY.
Peavey's liability to the original purchaser for damages for any cause whatsoever and regardless of the form of action is limited to
the actual damages up to the greater of Five Hundred Dollars ($500) or an amount equal to the purchase price of the product that caused
the damage or that is the subject of or is directly related to the cause of action. This limitation of liability will not apply to claims for personal
injury or damage to real property or tangible personal property allegedly caused by Peavey's negligence. For information on service
under this warranty, call a Peavey customer service representative at (601) 483-5376.
©1995
input may use the program input, but
the purchase of an input module is not
necessary. The program level control
regulates the level of this input, and the
signal is routed through the system
bass and treble controls.
The power section delivers 35 watts
and includes built-in SPS™ protection,
which allows the MMA 835T to produce
full power capability without audible
power amp clipping. A broad load
impedance range is provided, and 25
and 70 volt fully isolated line outputs
are standard equipment. The MMA
835T is packaged as a stand-alone unit,
but will also rack-mount into a standard
19" rack with an optional rack-mount kit.
ARCHITECTURAL AND
ENGINEERING
SPECIFICATIONS
The mixer amplifier shall have eight
modular input channels and one
dedicated program input. The master
section shall include one master volume
LIMITED WARRANTY
ARCHITECTURAL ACOUSTICS®
Features and specifications subject to change without notice.
A Division of Peavey Electronics Corporation
711 A Street / Meridian, MS 39301 / U.S.A. / (601) 483-5376 / Fax 486-1278
®
#80302314
level control, two EQ controls providing
10 dB of boost or cut at 100 Hz and
10 kHz, a "contour" switch providing
6 dB of boost at 100 Hz and 6 dB of
boost at 10 kHz, and a green status
LED. Internal muting shall be accom-
plished at the modular level by means
of two dedicated mute lines. External
muting shall be accomplished via screw
terminals on the back panel. Provision
for an external master volume control
shall be made through barrier strip
connections on the back panel.
The unit shall be packaged in a
rugged metal chassis 17" wide by 3.5"
high by 15.5" deep. The unit shall
operate from 120 volts AC, 60 Hz
power. The internal amplifier shall be
capable of delivering 35 watts RMS into
4 ohms and 8 ohms, as well as provid-
ing 25 volt and 70 volt line outputs. The
unit shall be capable of delivering rated
power from 20 Hz to 20 kHz 1 dB into
4 ohms at its direct output at less than
0.5% distortion with system hum and
noise at least 77 dB below rated output.
The unit shall be a Peavey Architectural
Acoustics Division model MMA™ 835T.
Printed in U.S.A. 11/95
®
TM
Advertisement
