Download Print this page

Peavey Miniframe 108nt Specifications page 4

Digital signal processing

Advertisement

Level Sensor
, noise gates, and
limiters
• Equalization filters: all-pass filters,
band-pass filters, CD horn lift,
graphic EQs, high-pass filters, low-
pass filters, parametric filter sets,
shelving filters, and tone controls
• Error indicators for digital errors
• Feedback Ferret
acoustic feedback
elimination technology
• Hardware failure indicators
• Labels: graphic areas to type in any
type of label, banner, etc.
• Level controls: attenuators with and
without trim control (limits); cross-
faders; distribution amplifiers with 2
to 16 outputs; multi-channel
attenuator groups from 2 to 16
channels; On-Off switches; panning
attenuators from 2 to 5 channels;
ramps with adjustable ramp level
change, ramp time, and ramp rate
• Logic controls:
Boolean with 2, 4, 8 or 16 inputs
RPN: base integer RPN, base logic
RPN, base % RPN, control inverter,
dual flip-flop, event counter, or flip-
flop functions
• Meters: LED with tiny and large
signal-presence or overload indication
• Peak and RMS meters in 4
appearances with parameter controls
• Mixers from 2 to 64 inputs and from 1
to 16 outputs
• Presets: up to 255 system-wide with
more possible
• Program launchers to launch other
programs from within MWare
• RoomLink
room combiners, using
either automixers, mixers, or mixers
with delay, for 3 to 15 rooms
• Routers: from 1 to 32 inputs and from
1 to 32 outputs, with or without
• Processor preconfigurations for 4
Peavey speaker systems
• Sub-presets: up to 255 for individual
child windows with more possible and
schedulable with a built-in event timer
• System mute to mute all outputs
simultaneously
• Test functions: DC-voltage
generator, frequency-response
probe, I/O probe, pink-noise
generator, signal probe, sine-wave
generator, and a white-noise
generator
• Title blocks: a graphic area to type in
any type of title, etc.
• Via function to allow a signal to loop
back up the signal chain without
creating feedback oscillation
• Wave file players for 32, 44.1, and
48 kHz system sample rates at 100%,
50%, and 25% of that sample rate.
Notes: (1) New devices may be created
and stored by the user in these
libraries
(2) Any control parameters of any
of the above devices may be
controlled via the control ports on
the BoB or CAB I/Os, and via
third-party control software with a
properly configured interface port.
Other software packages not offering the
stability, security or flexibility of these
operating system and design/control/
diagnostics packages shall not be accept-
able. The Miniframe 208nt/108nt system
shall have the following front-panel con-
trols and connectors: Front door and key-
board locks, system power switch; power
3.x
and HDD LEDs; AT keyboard and PS2
mouse connectors. On the rear panel, it
shall have a Euro-style AC cord connector,
a DB-25 parallel connector, an AT key-
board connector, a PS2 mouse connector
a DB-15 video connector, one RJ-45
10/100BaseT port, and two COM port DB-
9 connectors for COM 1 and COM 2.
The Miniframe 208nt/108nt shall have a
320-Watt universal power supply, UL,
CSA, and CE listed. It shall operate on AC
power at either 50 or 60 Hz +/-5%, from
100 to 120 VAC or 200 to 240 VAC
+/-10% with Power Factor Correction
depending on the source voltage. The
power supply shall consume no more than
805 Watts and produce no more than
2737 BTU/Hr. at 115 VAC fully loaded, or
consume no more than 920 Watts and
produce no more than 3128 BTU/Hr. at
230 VAC fully loaded. It shall draw a maxi-
mum in-rush current of no more than 60A
at 115 VAC and no more than 35 A at 230
VAC.
The Miniframe 208nt/108nt shall be 6.97"
(17.70 cm) high by 19" (46.26 cm) wide by
19.03" (49.02cm) deep and require a 24"-
deep rack. It shall weigh 40 lbs. (18.18 kg)
w/o DPU boards. It shall be finished in
grey powder-coat painted steel. It shall be
supplied with the following accessories: a
detachable AC cord, rack slides, keys for
the front door and keyboard lock,
Microsoft Windows 2000 Professional CD,
MediaMatrix
MMX SBC, or equivalent, or better and
drivers for the 10/100BaseT fast Ethernet
board and PCI video board.
The Miniframe 208nt/108nt shall be in
compliance with the standards of and list-
ed by UL, CUL, CE, and FCC part 15, A.
The Miniframe system shall be the Peavey
MediaMatrix Miniframe 208nt/108nt.
Note: Microsoft
a registered trademark of Microsoft
Corporation, and Motorola
trademark of Motorola, Inc. Celeron
trademark of Intel. CobraNet
mark of Peak Audio, Inc.
4
MWare
3.x CD, Pentium
®
Windows
2000 is
®
®
is a registered
®
is a
is a trade-

Advertisement

loading

This manual is also suitable for:

Miniframe 208nt