Table of Contents
Advertisement
The GK330 Utility functions
The GK330 features several utility functions which affect the keyboard globally. The
functions are: TRANSPOSE, TUNE and PAN. The UTILITY functions are twin-ac-
tion buttons organized in two rows: the top row are increase [INC] controls while the
bottom row are decrease [DEC] controls.
Transpose
The TRANSPOSE function allows you to change the pitch of the instrument in semi-
tone steps, up to a maximum setting of 12 semitones above or below standard pitch.
If you press either the [INC] or [DEC] TRANSPOSE buttons once only, the display
shows the normal pitch setting (00).
Press the [INC] or [DEC] TRANSPOSE buttons repeatedly to raise or lower the
pitch in semitone steps until you reach the value required.
The cancel the Transpose setting and restore normal pitch, press both [INC] and
[DEC] TRANSPOSE buttons at the same time.
Tune
The TUNE function allows you to fine tune the instrument in steps on one cent at a
time (cent = one hundredth of a tone).
If you press either the [INC] or [DEC] TUNE buttons once only, the display shows
the normal tuning setting (00) corresponding to the standard A = 440 Hz.
Press the [INC] or [DEC] TUNE buttons repeatedly to raise (max: 50) or lower (max:
50) the tuning until you reach the value required.
The cancel the Tuning setting and restore normal pitch, press both [INC] and [DEC]
TUNE buttons at the same time.
Pan
The PAN function allows you to change the stereo pan position of the overall sound,
moving the sound at the speakers either to the left or to the right.
If you press either the [INC] or [DEC] PAN buttons once only, the display will show
the normal setting corresponding to Pan at the centre (00).
Press the [INC] or [DEC] PAN buttons repeatedly to pan the overall sound to the left
(max: 07) or to the right (max: 07).
The cancel the Pan setting and restore the normal Pan position (centre), press both
[INC] and [DEC] PAN buttons at the same time.
20 GK330 Owner's manual
INCREASE VALUE
DECREASE VALUE
Note: The programmed TRANSPOSE setting will re-
main memorized until you turn the instrument off.
When you turn GK330 on again, the instrument will
set to the normal Transpose setting (00).
Note: The programmed TUNE setting will remain
memorized until you turn the instrument off. When
you turn GK330 on again, the instrument will set to
the normal Tune setting (00).
Note: The programmed PAN setting will remain memo-
rized until you turn the instrument off. When you turn
GK330 on again, the instrument will set to the normal
Pan setting (00)
Hide quick links:
Advertisement
Table of Contents
