Dell P126G Service Manual page 62

Table 11. System setup options—Passwords menu (continued)
Passwords
Enable Non-Admin Password Changes
Admin Setup Lockout
Enable Admin Setup Lockout
Master Password Lockout
Enable Master Password Lockout
Table 12. System setup options—Update,Recovery menu
Wireless
UEFI Capsule Firmware Updates
Enable UEFI Capsule Firmware Updates
BIOS Recovery from Hard Drive
BIOS Downgrade
Allow BIOS Downgrade
SupportAssist OS Recovery
BIOSConnect
Dell Auto OS Recovery Threshold
62 System setup
Enables or disables the user to change the system and hard drive password
without the need for admin password.
Default: ON
Enables or disables the user from entering BIOS Setup when an Admin
Password is set.
Default: OFF
Enables or disables master password support.
Default: OFF
NOTE: Hard drive passwords must be cleared before the setting can be
changed.
Enable or disable internal WLAN/Bluetooth devices.
By default, WLAN is selected.
By default, Bluetooth is selected.
Enables or disables BIOS updates through UEFI capsule update packages.
Default: ON
Enables the computer to recover from a bad BIOS image, as long as the Boot
Block portion is intact and functioning.
Default: ON
NOTE: BIOS recovery is designed to fix the main BIOS block and cannot
work if the Boot Block is damaged. In addition, this feature cannot work in
the event of EC corruption, ME corruption, or a hardware issue. The
recovery image must exist on an unencrypted partition on the drive.
Controls flashing of the system firmware to previous revisions.
Default: ON
Enables or disables the boot flow for SupportAssist OS Recovery tool, in the
event of certain system error.
Default: ON
Enables or disables cloud Service OS recovery if the main OS fails to boot
within the number of failures equal or greater than the value specified by Dell
Auto OS Recovery Threshold, and local Service does not boot, or is not
installed.
Default: ON
Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell operating system Recovery tool.
Default: 2.