Dell P126G Service Manual page 58

Table 6. System setup options—Storage menu (continued)
Storage
Port Enablement
SMART Reporting
Enable SMART Reporting
Drive Information
Table 7. System setup options—Display menu
Display
Display Brightness
Brightness on battery power
Brightness on AC power
Touchscreen
Touchscreen
EcoPower
Full Screen Logo
Table 8. System setup options—Connection menu
Connection
Wireless Device Enable
WLAN
Bluetooth
Enable UEFI Network Stack
Table 9. System setup options—Power menu
Power
Battery Configuration
58 System setup
Enables or disables the onboard drives.
Default: ON
Enables or disables Self-Monitoring, Analysis, and Reporting Technology
(SMART).
Default: OFF
Displays the information of various onboard drives.
Sets the screen brightness when the computer is running on battery power.
Default: 50
Sets the screen brightness when the computer is running on AC power.
Default: 100
Enables or disables the touchscreen.
Default: ON
Enable EcoPower - Increases the battery life by reducing the display brightness
when appropriate.
Default: On
When turned on, the full screen logo is displayed if the image matches the
screen resolution.
Default: OFF
Enable or disable internal WLAN devices.
By default, WLAN is selected.
Enable or disable internal Bluetooth devices.
By default, Bluetooth is selected.
Enables or disables UEFI networking protocols, if they are installed and
available.
Default: ON
Enables the computer to run on battery during power usage hours. Use the
below options to prevent AC power usage between certain times of each day.