Option Menu - Philips Q Line 65BDL3511Q User Manual

65BDL3511Q/75BDL3511Q/86BDL3511Q
Light Sensor
Light sensor function is to adjust brightness automatically
when ambient light changed.
Human Sensor
Set the display to turn on backlight if it does sensor human
and turn off backlight after an amount of time specified
The options are: {Off, 10 ~ 60} minutes.
Power LED Light
Select {Off} to turn off the indicator.
OSD turn off
Set the period of time the OSD (on-screen display) menu
stays on the screen.
The options are: {5 ~ 100} seconds.
OSD Transparency
Adjust OSD transparency.
• {0} - Transparency off.
• {1-100} - Transparency level 1-100
Information OSD
Set the period of time the information OSD is displayed on
the bottom of the screen. The information OSD will display
when input signal is changed.
The information OSD will remain on the screen with {Off}
selection.
The options are: {1 - 60} seconds.
Logo
Choose to enable or disable the picture of Logo when
turning on your display.
The options are: {Off} /{On}
Monitor ID
Set the ID number for controlling the display via the RS232
connection.
Each display must have a unique ID number when multiple
sets of display are connected. Monitor ID number range is
between 1 to 255.
• {1-255} – {Monitor ID} The default setting is 1.
• {1-255} – {Monitor group} The default setting is 1.
• {1-15} – {Tiling matrix} The default setting is 1.
• {Auto ID} The {Auto ID} setup function enables setting up
{Monitor ID} of connected machine according to {Tiling
matrix} settings. Example: Tiling matrix sets as 4
• {Tiling matrix}: Tiling matrix number range is between 1
to 15. The default setting is 1.
Monitor Id
Monitor Id
Monitor group
• {Auto ID}: The option are: {Start} / {End}. The default is
{End}.
• Switch to Start option to set up IDs of machines backward
from current one.
Once the setup is completed, the option exits to End
automatically.
To use this function, serially connect all machines with
1
1
30
RS-232 cable and set their Control ports to RS-232 too.
1 2
5 6
9 10
13 14
Monitor information
Shows information about your display, including Input
source, Resolution, Model name, SW version, serial number,
operation hours and MAC address.
Information
Input Source
Resolution
Model name
SW Version
Serial NO.
Operation hours
MAC address
Configuration reset
Reset all settings in Configuration menu to the factory preset
values.

6.2.7. Option menu

PICTURE Language
SCREEN Auto signal detection
Date and Time
AUDIO
TILING Schedule
NETWORK HDMI EDID
CONFIG HDMI with One Wire
Input resolution
OPTION
IR Control
Keypad Control
Power Save
Off Timer
Language
Set OSD menu language.
Auto signal detection
This function allows the display to detect and display
available signal sources automatically.
• {Off} - Once an input is connected, it can only be selected
manually.
3 4
7 8
11 12
15 16
XXXX
XXXX
XXXX
XXXX
XXXX
XXXX
English
2.0
Off
Off