Adjustment Of Vi Alarm Controls From Hubb; Device Menu; Led Illumination Colours; Bite Led Brightness - Wolf ICON Vi Instruction Manual

ADJUSTMENT OF Vi ALARM
CONTROLS FROM HUBB
DE V IC E M E N U
When the HUBB has been paired with the Vi press the
corresponding Alarm channel to change any settings.
Press and hold channel button until 'Device Menu' is shown
on screen.
< Device Menu >
[Enter]
When 'Device Menu' is shown, use OK button to enter sub
menu.
Go to 'Sensitivity' to adjust the connected bite Alarm line
sensitivity. When confirming this option a message will be sent
to the bite Alarm, if successful you will be notified on screen.
L E D IL L UM I N AT I O N C O L O UR S
< Alert Colour >
Blue
On activation of the bite Alarm
the tone is replicated on the HUBB
and the HUBB LED's replicate the
alert colour shown on the bite
Alarm. Depending on the HUBB/
Qr settings, the HUBB/Qr will also
vibrate on alert.
Go to 'Alert Colour' to change
the colour used to display alerts
on the Vi Alarm and HUBB.
7 Colours: Blue - Cyan - Yellow -
Magenta - White - Green - Red -
Stealth Mode (Off)
B ITE L E D BRI GHTN ES S
< LED Brightness>
7 3 %
A D V AN CE D
M EN U
< Advanced Menu >
[Enter]
A L E RT
T IM E OUT
< Alert Timeout >
30 secs
Go to 'LED Brightness' to change
the brightness of the LED
displayed on the Vi Alarm.
Use the back button to
leave 'Device Menu' and go
'Advanced Menu' and use OK
button to enter this menu.
Go to 'Alert Timeout' to adjust
the time that the LED remains
turned on after an alert on the
Vi Alarm.
60 seconds / 30 seconds / 20
seconds / 10 seconds /
5 seconds
7