Murray M26-T Instruction Manual page 23

Maintenance Chart
Maintenance of the air filter - Continued
1.
3.
Maintenance of the spark plug
Spark plug gap = 0.025 inch (0.7 mm). Tighten the spark plug with a torque of 12-15 Nm.
Check the spark plug for dirt and grime after 10
hours of operation and if necessary clean.
Thereafter service the spark plug after every 50
hours of operation.
1. Pull off the spark plug boot by twisting side
to side gently.
2. Remove the spark plug with the supplied
spark plug tube spanner.
3. Assemble in reverse order.
MAINTENANCE
2.
Tongue
Location
4.
1.
2.
&
CARE
23