Coalesce Quick Start Guide
Create. Connect. Collaborate.
Any number of users can wirelessly connect, share, and
control content from any device.
Configure Your Coalesce for Use
Follow the instructions below to set up the hardware and software
connections on the Coalesce.
Items You Will Need
Make sure you have the following items:
• Coalesce unit
• 5 V power supply (US version, WC-COA) or 5 V power supply with EU, UK,
and AU clips (international version. WC-COA-I)
• USB power cable
• HDMI cable
• HDTV display (not included in your package)
Set Up the Hardware
Follow these steps:
1. Using an HDMI cable (included), attach the Coalesce unit to an HDTV
display.
2. Connect one end of the included power cord to the power connector on
the Coalese and connect the other end to the included power supply.
For international users, snap the correct power clip onto the power plug.
Plug into a 100–240 VAC power outlet.
3. Connect a mouse and keyboard (optional) to the USB connector on the
Coalesce box.
4. After you connect the Coalesce to the mouse, the license agreement
prompt pops up on your screen. Click "Accept" to accept the license
agreement (one time only).
WC-COA
WC-COA-I