Table of Contents
Advertisement
Adjusting the clutch free play
The clutch free play must be checked
and, if necessary, adjusted as follows
at the intervals specified in the periodic
maintenance and lubrication chart.
1. Loosen the locknut.
2. Slowly turn the clutch adjusting
screw in direction (a) until resis-
tance is felt, and then turn it 1/8
turn in direction (b).
(b)
(a)
2
1
1. Locknut
2. Clutch adjusting screw
3. Tighten the locknut to the speci-
fied torque.
Tightening torque:
Locknut:
8 N·m (0.8 kgf·m, 5.9 lb·ft)
Periodic maintenance and adjustment
EAU44664
TIP
When tightening the locknut, hold the
clutch adjusting screw with a screw-
driver so that it does not turn together
with the locknut.
7-18
Adjusting the brake lever free
play
Measure the brake lever free play as
shown.
1
3
2
(b)
(a)
1. Rubber cover
2. Brake lever free play adjusting bolt
3. Locknut
4. Brake lever free play
Brake lever free play:
10.0–20.0 mm (0.39–0.79 in)
Periodically check the brake lever free
play and, if necessary, adjust it as fol-
lows.
1. Slide the rubber cover back.
2. Loosen the locknut at the brake le-
ver.
EAU44886
4
7
Advertisement
Table of Contents
Troubleshooting
