Starting And Warming Up A Cold Engine; Starting A Warm Engine - Yamaha TT-R110 2023 Manual

Starting and warming up a
cold engine
1. Turn the fuel cock lever to "ON".
2. Turn the key to "ON" and make
sure that the engine stop switch is
set to " ".
3. Shift the transmission into the
neutral position.
WARNING
 Be sure to shift the transmission
into neutral before starting the
engine.
 Never ride with the sidestand
down.
4. Turn the starter (choke) on and
completely close the throttle. (See
page 4-6.)
5. Start the engine by pushing the
start switch or by pushing the
kickstarter lever down.
6. When the engine is warm, turn the
starter (choke) off.
Operation and important riding points
EAU44815
TIP
The engine is warm when it responds
quickly to the throttle with the starter
(choke) turned off.
NOTICE
For maximum engine life, never ac-
celerate hard when the engine is
EWA14411
cold!

Starting a warm engine

Follow the same procedure as for
starting a cold engine with the excep-
tion that the starter (choke) is not re-
quired when the engine is warm.
ECA11043
6-2
EAU16641
6