Maintenance - Bosch GHG18V-50 Operating/Safety Instructions Manual

Heat Shrinking
1. Attach the reflector nozzle (Fig. 4, 11).
2. Choose the diameter of the heat shrink
plastic tube suitable for the workpiece.
3. Evenly heat the heat shrink plastic tube
until it fits closely against the workpiece.
To avoid accidents, always disconnect the battery pack from tool before
servicing or cleaning.
Service
NO USER SERVICE-ABLE
PARTS INSIDE. Preven-
tive

maintenance

thorized personnel may result in misplacing
of internal wires and components which
could cause serious hazard. We recom mend
that all tool service be performed by a Bosch
Factory Service Center or Authorized Bosch
Service Station.
Do not use attachments/accessories other than those specified by
Bosch. Use of attachments/accessories not specified for use with the tool
described in this manual may result in damage to tool, property damage, and or personal in-
jury.
Reduction nozzle
1600A02E16 GHG18V-50 20211221.indd 12
Applications
Maintenance
performed by un au-
Attachments
Attachments Included
11
Batteries
Be alert for battery packs that are nearing
their end of life. If you notice decreased tool
performance or significantly shorter running
time between charges then it is time to re-
place the battery pack. Failure to do so can
cause the tool to operate improperly or dam-
age the charger.
Cleaning
Ventilation openings and switch levers must
be kept clean and free of foreign matter. Do
not attempt to clean by inserting pointed ob-
jects through opening.
Reflector nozzle
-12-
FIG. 4
heat shrink
plastic tube
12/21/21 7:52 AM