Husqvarna Viking Tribute 150C User Manual page 26

15. When sewing buttonholes in stretch fabric we recommend
to cord the buttonhole for better durability, see page 40.
16. When sewing a manual buttonhole or the darning program
the reverse icon is shown to indicate that you need to press
Reverse when the buttonhole columns or the darning stitch
are sewn to the desired length.
17. Stitch density is shown instead of stitch length when a
buttonhole, bartack or darning stitch is selected or when
a satin stitch is selected and ALT is pressed. Reduce or
increase the stitch density by pressing Stitch Length –
and +.
18. Buttonhole size indication when using the Sensor One-
Step Buttonhole Foot. Set the size of the button by
pressing the up and down Navigator Arrows. Confirm with
OK.
19. The icon for lowering the feed teeth is shown when sewing
on buttons is selected.
20. Set the number of stitches to sew on the button by
pressing the up and down Navigator Arrows.
21. Recommendation to use the multipurpose tool (optional
accessory) when sewing on a button. Place the thin end of
the multipurpose tool under the button when sewing on
light fabrics. Use the thick end for heavier fabrics.
26 – Operating your Sewing Machine
Manual Buttonhole
Sensor One-Step Buttonhole
19
Sewing on button
15
16
17
18
20
21