Samsung WA7750M Service Manual page 20

Part
Thermistor
Clutch Assembly
(continued)
18 _ Disassembly and Reassembly
Figure Description
1. Remove the 2 screws.
1. Remove the 2 screws holding the panel
control.
2. Separate the top cover assembly by lifting
and all the wires connected to the housing.
3. After separating cover top assembly, remove
the 4 screws fixing the cover tub and
separate the hooks.
4. Separate the pulsator cap by inserting the tip
of a (-) screwdriver between the pulsator cap
and the pulsator.
5. Then lifting the screwdriver up.
6. Remove the bolt holding the pulsator with a
10mm wrench.