Installing The Software - Pantech PX-500 Quick Start Manual

Installing the Software

1. Insert the Sprint Mobile Broadband Card installation CD
into your CD-ROM drive.
2. If the CD does not auto start, select Start > Run and enter
d:\Sprint PCS Connection Manager.msi, where d is the
letter of your CD-ROM.
3. In the installation window, click Next.
4. Read the License Agreement and then click Yes to accept
the agreement and proceed with the installation.
5. Use the Next and Back buttons to navigate through the
wizard.
6. In the Installation Complete! window, click Restart.
Caution:
Do not insert the Sprint Mobile Broadband Card until you have
installed the Sprint PCS Connection Manager software and restarted
your computer.
7. Click OK when you are prompted to insert the
Sprint Mobile Broadband Card. Insert the card into the
Type II PC Card slot.
Note:
Do not force the Sprint Mobile Broadband Card into the slot. Insert
the card with the Sprint label facing up. (See "Inserting the Card" on
page 9.)
4 Installing the Software
8. Windows will detect the new hardware (Sprint Mobile
Broadband Card) and will install the necessary drivers.
The Add New Hardware Wizard or Found New Hardware
Wizard will automatically start, depending on your
operating system.
Note:
Windows 2000 users: You must log in with administrative privileges
to install the software and drivers.
Windows XP users: You may need to log in with administrative
privileges, depending on your Windows configuration.
Installing the Software 5