Advertisement
1. Press [MODE], then [CBL] to select the remote's
cable mode.
2. Press [SETTINGS], then [ALL] together until the
[TV] button illuminates.
3. Press [CH
]. The [TV] button will blink 3-times
and go out.
9. [MOVIES], [SPORTS], [NEWS] Buttons
Your remote has 3 Channel Memory Buttons –
[MOVIES], [SPORTS], [NEWS]
differently on some models). Each of these buttons
can store up to 5 cable channels. Each cable channel
can be up to 5-digits.
Some or all of your remote's Channel Memory
Buttons may come pre-tuned to channels or functions
selected by your cable operator.
been pre-tuned by your cable operator, they can be
programmed as follows:
Programming [MOVIES], [SPORTS], [NEWS]
To program the [MOVIES] button to cable channels 1,
12, 123, 231 and 17, follow these steps:
1. Press [MOVIES], then [CBL] together until the
[CBL] button illuminates.
2. Enter each channel as follows:
st
a. Enter 1
channel # - 001.
b. Press [CH +] to advance to next channel #
setting.
nd
c. Enter 2
channel # - 012.
d. Press [CH +] to advance to next channel #
setting.
rd
e. Enter 3
channel # - 123.
f. Press [CH +] to advance to next channel #
setting.
th
g. Enter 4
channel # - 231.
h. Press [CH +] to advance to next channel #
setting.
th
i.
Enter 5
channel # - 017.
3. Press [MOVIES] to store the above channels. The
[CBL] button will blink 3-times and go out.
store fewer than 5 channels, you can press the
[MOVIES] button any time after entering a
complete channel number.
4. Repeat the above steps to program the [SPORTS]
and [NEWS] buttons. Follow the example in step
1, but press [SPORTS] or [NEWS], then [CBL]
together until the [CBL] button illuminates.
Using [MOVIES], [SPORTS], [NEWS]
Using the above programmed channels as an
example...
(may be labeled
1. Press [MOVIES] – Cable set-top terminal tunes to
channel 001.
2. Press [MOVIES] again – Cable set-top terminal
tunes to channel 012.
3. Press [MOVIES] again – Cable set-top terminal
tunes to channel 123.
4. Press [MOVIES] again – Cable set-top terminal
If they have not
tunes to channel 231.
5. Press [MOVIES] again – Cable set-top terminal
tunes to channel 017.
6. Press [MOVIES] again – Cable set-top terminal
tunes to channel 1.... repeat.
Whenever a Channel Memory button is pressed, the
function of the transport buttons will automatically
switch back to Cable.
When pressing the [MOVIES] button, be sure to keep
the remote control aimed at your Cable set-top
terminal to ensure the full channel numbers are
received in their entirety.
Resetting [MOVIES], [SPORTS], [NEWS]
To reset [MOVIES], [SPORTS], [NEWS], follow these
steps:
1. Press [MOVIES], then [CBL] together until the
[CBL] button illuminates.
2. Press [MOVIES]. The [CBL] button will blink 3-
times and go out.
10. Operating Your Cable Set-Top Terminal
To
Your remote control is designed to operate all the
features and functions of your digital set-top terminal.
To operate your CABLE set-top terminal, press
[MODE], then [CBL].
In your remote's CABLE
mode, you can then press...
[ALL]
ALL devices on / off.
[CBL]
Cable set-top terminal on / off.
[TV]
TV on / off.
[VIDEO]
VCR / DVD on / off.
[AUDIO]
Audio on / off.
[CH
] / [CH
]
Increases / decreases cable
channel.
[VOL
] / [VOL
]
Increases / decreases volume.
[MUTE]
Mute
volume.
[EXIT]
Exits on-screen menus, view
guide, interactive screens.
[SETTINGS]
Displays program settings.
[GUIDE]
Displays
interactive
guide.
[INFO]
Displays
information.
[FAV]
View favorite channels.
[LAST]
Last channel viewed.
[A], [B], [C]
On-screen decision buttons.
[0] - [9]
Numeric entry buttons.
[PAGE
/ ]
Page up / down through menus,
program guide.
[ ], [ ], [ ], [ ]
Navigate on-screen menus,
program guide, PPV events and
interactive services.
[SELECT]
Select menu, interactive screen
item.
[BYPASS]
Switch between set-top terminal
and TV.
[TV / VCR]
Changes VCR Video inputs.
[VCR / VOD]
"Toggles"
the
between cable VOD (Video-On-
Demand) and VCR / DVD
functions.
Press [VCR / VOD]. If...
a. [CBL] illuminates, the VCR
buttons are operating your
cable VOD functions.
OR
[VIDEO] illuminates, the
VCR buttons are operating
your VCR or DVD functions.
b. While [CBL] or [VIDEO] is
program
channel,
time
VCR
buttons
Advertisement
