Table of Contents
Advertisement
HOW TO PREPARE THE MACHINE FOR OPERATION
Assemble the Handle
Attach upper (A) and lower (B) handle to handle
socket (C) by aligning holes and securing with 2 part
screws (D). See figure 1.
Install the Bag Assembly
Position the bag coupling into the left bag support (A)
and turn the bag knob (B) counterclockwise to secure
bag to base. Attach bag spring to bag hook (C)
located on the rear of the top cord hook. See figure
2.
On the Collector Cup Model, the lower handle fits
through the tube on the front of the collector cup
frame.
HOW TO OPERATE THE MACHINE
With power cord plugged into the proper voltage
outlet, lower handle to start the vacuum. Lower
handle by depressing handle release pedal at the
lower left rear of the vacuum. Depress pedal again
and lower handle all the way to the floor to clean
under low furniture.
To stop vacuum, raise handle to upright position.
For handle positions, see figure 3.
®
Clarke
Upright Vacuum Operator's Manual
A
D
B
D
C
Figure 1
B
A
Figure 2
Store
Figure 3
C
Operate
Clean Under
Page -9-
Advertisement
Table of Contents
