Advertisement
2) Starting from one side at a time, place a fi ber glass rod joint (1) in each opening
between the sleeves along the side.
3) Insert one "A-1" rod with the end without the metal coupling into the canopy sleeve
fi rst. The end of the rod with the metal coupling shall be facing you.
4) Continue inserting 3 more "A-1" rods through the canopy sleeve making sure the "A-1"
rods are inserted into the metal coupling and through the fi ber glass rod joint (1).
5) Slide one "A-2" rod into the sleeve making sure it's inserted into the last "A-1" rod metal
coupling.
Note: Each side shall have 4 "A-1" rods and one "A-2" rod, and the rods shall be inserted
through all the fi ber glass rod joints (1).
6) Repeat above steps 2 to 5 with the other side of the canopy sleeves.
6
7) Make sure the rods are inserted through all the fi ber glass rod joints (1).
2
1
2
SAVE THESE INSTRUCTIONS
Page 3
(176IO) POOL CANOPY ENGLISH 4.875" X 7.25" 04/23/2022
1
2
(4 x "A-1")
(4 x "A-1")
2
(1 x "A-2")
2
1
176
IO
1.2
2
(1 x "A-2")
3
1.3
3
Advertisement
