Easy Setup Wizard - D-Link DIR-610N User Manual

Section 3 - Configuration
When you log in to the router for the first time, the router will automatically attempt to detect your Internet connection type.
Once the Internet type has been detected, you may be prompted to enter additional information such as a username and
password (PPPoE). After your Internet connection has been set up, the following page will appear, showing a summary of the
router's Internet, wireless, and admin settings.
Internet Displays the Internet connection type detected by the router, and
Settings: the current status of your Internet connection. If the router was
unable to detect your Internet settings, click the Configure button
to commence the Internet connection setup wizard. Please refer to
"Internet Connection Setup Wizard" on page 11 for further
information.
Wireless Displays the current status of your router's wireless network
Settings: including network name (SSID), password, and security type. You
can make changes to these settings by clicking on the Configure
button. Please refer to "Wireless Security Wizard" on page 12 for
more information on using the setup wizard.
Admin Displays the current settings for the router's administrator
Settings: account. This information will be used to log in to the web-based
configuration utility. Check the Set the Password of Device
to Wireless Network Key to make the administrator account
password the same as the wireless network key set in the previous
step.
Check the Save my Network Settings box to save the details of
the current configuration as a text file on your computer. Once
Save is clicked, you will receive a prompt to save the text file.
Click Save to save the current configuration.
D-Link DIR-610N User Manual

Easy Setup Wizard

10