Table of Contents
Advertisement
The equipment can be removed using the following procedure.
r
Set
Panel (X) upper, Bottom panel
Mechanism deck
Note : Follow the disassembly procedure in the numerical order given.
3-1. PANEL (X) UPPER, BOTTOM PANEL REMOVAL
* Caution during assembly
Align the MEGA BASS knob,
AVLS knob and the HOLD knob
position with the switch
on the Main board.
3-2. PLATE (CONTROL) ASSY, ORNAMENTAL REMOVAL
1 Spring (Shutter),
Tension
SECTION 3
DISASSEMBLY
Plate (Control) assy, ornamental
Optical pick-up
2 Screws
(M1.4 precision pan)
Panel (X) upper
Lid, battery case
5 Screws
(M1.4 precision pan)
Bottom panel
4 Screw (step)
3
Shutter
Plate (Control) assy,
ornamental
Main board
1
4
6
2 Screw
(M1.4 precision pan)
5 Screws
6
4 Screw (step)
– 8 –
3 Screws
(M1.4 precision pan)
Stripe (A) assy,
Ornamental
7
5 Screws
(M1.4 precision pan)
(M1.4 precision pan)
2 Screw
(M1.4 precision pan)
Advertisement
Table of Contents
