Schedule Override (Hold) - Mitsubishi PAC-SDW01RC-1 Operation Manual

Schedule Override (Hold)

Table of Contents
A schedule override occurs when the controller is run-
ning a schedule and the set point is adjusted. During
an override condition, the controller will display "Hold"
and maintain the set point temporarily or permanently
based on your preferred settings.
Schedule Override
(Temporary or Permanent)
1) Navigate to the Settings menu. (see page 4)
2) Select "Preferences" from the Settings menu.
3) Select "Temperature Hold" from the Preferences menu.
4) Set your temporary or permanent Hold.
• If temporary, set the duration of the temporary hold.
5) To confirm your changes, return to the home screen
and verify that the word "Hold" appears next to the
set point.
SDW01 Operation Manual
Temporary Hold: Overrides the current temperature
set point for a designated period of time.
Permanent Hold: Overrides the current temperature
set point permanently until you manually change it or
reactivate a schedule.
Cancel Schedule Override
(Temporary or Permanent)
To end a Hold (temporary or permanent) and return to
the program schedule, repeat steps 1-3 listed to the
left and select "Cancel Hold".
To confirm your changes, return to the home screen and
verify that the word "Hold" is no longer appears next to
the set point.
10