Registering The Cordless Camera - Panasonic KX-THA13 Operating Instructions Manual

Registering the cordless
camera
1
Base unit:
Press and hold {INTERCOM} until it
starts flashing and a beep sounds.
2
Cordless camera:
Press PROG. (program) on the back
side of the cordless camera with a
pointed object such as a pen until a
beep sounds and the indicator on the
cordless camera turns yellow-green
and starts flashing.
L When the registration is done
successfully, the cordless camera
beeps and the indicator stops
flashing but remains lit up (page 11).
Note:
L You can customize the name for the
cordless camera (page 32).
For assistance, please visit http://www.panasonic.com/phonehelp
Resetting the cordless camera
If you reset the cordless camera, the
cordless camera is canceled from the base
unit.
Press and hold PROG. (program) on the
back side of the cordless camera with a
pointed object such as a pen until a beep
sounds. With the pen still holding PROG.,
wait until the indicator on the cordless
camera starts flashing in yellow-green
then turns into orange (flashing).
When resetting is completed, the indicator
flashes rapidly in red.
Note:
L When the resetting is completed, all the
images in the cordless camera are
erased.
L To use the cordless camera after
resetting, you need to deregister to
erase the cordless camera information
from the base unit and then reregister it
to the base unit.
Deregistering a cordless
camera o
The base unit can cancel a registered
cordless camera.
1
{MENU} i h i {SET}
2
"Deregistration" i {SET}
3
Select the desired unit. i {SET}
4
{3}{3}{5} i {SET} i {STOP}
Preparation
15