IMPORTANCE OF PM SCHEDULE EXECUTION
Pulsar 150/180 DTS-i
Service Station Manual
7. Set the air or VC screw to get CO value between 1.5 ~ 2.5 % at idling
RPM or 1400
+
100.
8. Reconfirm the engine idling RPM & CO are within specified limit.
9. For getting better engine performance & optimum fuel efficiency, achieve
CO% as recommended.
Required Special Tools & Equipment
Tachometer
Screw Driver
62
CO Gas Analyzer
Silicon Tube
Thermometer
Dealer Development Center
Akurdi Pune