Cd-Rom Software Installation - Hasbro Tiger Electronics Fast Flicks User Manual

Table of Contents

Advertisement

To check what TV system is currently set: Press the Mode button twice. You
can then view whether NTSC or PAL is set.
TV Mode: Change the camera internal settings
By connecting the video cable to the TV set you can change some settings on
the camera. (The TV must have a video-input port).
To install, power up the unit after connecting the stereo jack of the camera
to the RCA jack of the TV (Video input socket). You will see the menu on the
TV screen as illustrated below.
REVIEW
SLIDE SHOW
DELETE ALL
INFO
FORMAT
LANG
TIMEOUT
RESTORE DEFAULTS
SAVE
9
MAIN MENU
FINE
ENGLISH
60 SEC
REVIEW – Reviewing Pictures
1. Press the 'Shutter' button to choose the 1st picture to display on the TV
screen.
2. Press the Mode (Scroll) button to display the 2nd picture. Continue these
steps to skip through all the pictures that are currently saved on the camera.
3. Once the last picture is seen, the screen will show 'Done'. Press the Mode
(Scroll button) again and it will skip to the 1st picture again and will continue
to review the pictures stored in the same order until the screen shows
'Done' again.
4. If you press the Shutter button when 'Done' is shown, the screen will jump
back to the main 'Menu' screen.
5. If a movie file is shown, you will see the first frame and the word "MOVIE".
(Unfortunately, you can not view your movies on the TV.)
6. If you press the Shutter button when a picture is displayed. You will see the
screen as illustrated below:
FILE INFO
DELETE
|>DONE
34 KB
SVI_0001
7. Press the Shutter button to choose delete function. The screen will display
as below :
CONTINUE FILE
DELETE?
OK
|> CANCEL
8. Press Mode button to choose OK. Press Shutter button to confirm. The
picture will then be deleted. After that, it will display the next photo.
SLIDE SHOW – (Display stored pictures one by one)
1. Press Mode button to choose SLIDE SHOW.
2. Press Shutter button to confirm.
3. The 1st photo is uploaded to the screen in appx. 4 seconds. It will display
the photo for 5 seconds.
4. The next photo is then automatically uploaded and the process is repeated
until all the pictures have been displayed.
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

59434

Table of Contents