Lamp Indications; Maintenance; Battery Recycling - Panasonic EY-6950 Operating Instructions Manual

. LAMP INDICATIONS

Red Flashing
Flashing quickly
Orange Flashing

. MAINTENANCE

Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, ben-
zine, or other volatile solvents for cleaning.

BATTERY RECYCLING

ATTENTION:
A nickel metal hydride battery that is recyclable powers the product you have pur-
chased.
Please call 1-800-8-BATTERY for information on how to recycle this battery.
. ACCESSORIES
Use only bits suitable for size of drill's chuck.
RECOMMENDED SPEED SELECTION
CAUTION: USE AT LOW SPEED WHEN STRONG FORCE IS NEEDED
DURING OPERATION.
(Using at high speed while a strong force is applied may cause a
motor breakdown.)
Use the following as a guide to select low or high speed for the job.
EY6950
MATERIAL/ MORTAR /
CONDITION BRICK
ø 10 mm (3/8")
HIGH
or less
ø 13 mm (1/2")
LOW or less
(Slow operation)
Red Lit
Orange Lit
DRILLING
WOOD /
YELLOW PINE
Thickness: 40 mm
(1-37/64") or less
Not used
ø 36 mm (1-27/64")
or less
Charger is plugged into a wall outlet.
Ready to charge.
Now charging
Charging is completed.
Battery pack is warm. Charging will begin
when temperature of battery pack drops.
Charging is not possible. Clogged with
dust or malfunction of the battery pack.
METAL METAL HOLE SAW
Cold-rolled steel plate (SPC)
Thickness: 1.6 mm (1/16") or less
ø 6.5 mm (1/4")
or less
ø 13 mm (1/2") ø 34 mm (1-11/ 32")
or less
- 10 -
SCREW
TIGHTENING
Wood screws
ø 4 mm (5/32")
Not used
or less
ø 6.8 mm (17/64")
or less or less