Operation Check - Panasonic HG-F Series User Manual

4.2 Operation Check

Actually detect an object with the sensor set up in
● The following procedure is for when the output operation is set to light-ON (L-on). For the
setting procedure of the output operation, refer to
1.
Check that the output operation indicator on the digital display is unlit.
2.
Insert a sensing object. Check that the measured value on the digital display fluctuates.
3.
If the measured value falls within the range of the threshold set in
(Normal Sensing
WUME-HGF1UM-2
Ramco Innovations www.ramcoi.com Got Questions? Phone 800-280-6933 Email nsales@ramcoi.com
Mode)", the output operation indicator will light up.

4.2 Operation Check

"4.1 Basic Setup Procedure".
"5.8 Output Operation
"4.1.3 2-point Teaching
Setting".
4-7