Troubleshooting - Beko QWIK-PURE 10 Installation And Operation Manual

QWIK-PURE ®

14. Troubleshooting

In the event of any malfunctions which are not described, malfunctions which cannot be eliminated or
questions, contact BEKO TECHNOLOGIES customer service, see "1.1 Contact" on page 4.
Error or fault pattern
The level indicator's red marking
is visible.
Water is coming out from the
ventilation opening of the clean
water tank.
62 | 64
Possible cause
1. The filter cartridge cannot
absorb any more oil.
2. The filter cartridge is clogged.
3. The riser is clogged.
1. The water outlet hose on the
elbow connector is clogged.
2. The connection to the
wastewater system is clogged.
Installation and operation manual
Measure
Replace the filter cartridge (see
section "9.3.2 Replacing filter
cartridges" on page 42).
Replace the filter cartridge (see
section "9.3.2 Replacing filter
cartridges" on page 42).
Clean or replace the riser.
Clean or replace the water outlet
hose.
Check and clean the connection to
the wastewater system.