2. Push the coin-cell battery-release lever on the coin-cell battery socket to release the coin-cell battery out of the socket.
3. Remove the coin-cell battery.
Installing the coin-cell battery
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the coin-cell battery and provides a visual representation of the installation
procedure.
Steps
1. Insert the coin-cell battery into the socket with the positive side (+) label facing up and snap the battery in the socket.
2. Place the computer in an upright position.
Next steps
1. Install the
left-side
cover.
2. Follow the procedure in
Front-chassis fan
Removing the front-chassis fan
Prerequisites
1. Follow the procedure in
2. Remove the
left-side
After working inside your
Before working inside your
cover.
computer.
computer.
Removing and installing components
35