Jabra Link 14201-20 How To Connect page 2

04/11/2022 08:29
Please note that full functionality is only available when all the color-
marked parts of the cables are inserted into the EHS adapter, see photo.
Put the headset into the base and activate the "DHSG" mode.
Hold down the "phone" button on the base of the Jabra GN9330e for
approx. 6 seconds until the online display (blue LED) on the headset starts
to flash. The current software is displayed to you by activating the volume
controller in the form of the charge display (green LED).
LEDs from left to right:
LED 1 = RHL
LED 2 = DHSG
LED 3 = AEI
LED 4 = MSH
Thereafter, you can switch into the different software modes (LED 1-4)
with the "volume" controller on the headset. To confirm the software has
successfully installed, the base automatically switches back to charge
mode after approx. 15 seconds.
Base setup:
https://www.apac.jabra.com/supportpages/jabra-link-14201-20/14201-20/faq/2188ed47- Page 2 of 4
9bb4-4f91-bf14-ca96af19c4b8