Table of Contents
Advertisement
• WPA3-EAP or WPA2/WPA3-EAP: Select EAP Type and press
Enter.
8. Select the protocol for authentication as the EAP Type setting.
9. When you are finished, select Return and press
Enter to return to the Network Settings menu.
10. Select Set, and follow the on-screen instructions to save your settings and exit the menus.
Parent topic:
Wireless Network Projection
Installing the Wireless LAN Module
Your projector has a built-in wireless LAN module. If you install an optional Epson 802.11b/g/n wireless
LAN module, you can use both network connection methods at the same time. When you install the
wireless LAN module, set the Simple AP setting to On. Do not install any other type of wireless module.
Caution: Never remove the module while its indicator light is blue or flashing, or while you are projecting
wirelessly. You may damage the module or lose data.
Note: The wireless LAN module is not included with your projector.
1. Remove the wireless LAN module cover screw.
62
Advertisement
Table of Contents
