Table of Contents
Advertisement
Management | Diagnostics
Use system Diagnostics tools to set up parameters such as Diagnostics Type, Protocol Type, Ping Count,
Packet Size, Ping Timeout, and get the Diagnostic Result afterward.
Diagnostic Tool: Select Ping or Traceroute to check network connectivity.
IP Address/Domain Name: Enter the destination to check the CPE connectivity by IP address or
Ø
Domain name, for both IPv4 and IPv6.
Ping Count: Setup how many ping packets you want to test.
Ø
Ping Packet Size: Setup the size of ping packet you want to test.
Ø
WAN/APN Interface: Setup which WAN interface you want to test.
Ø
Management > Diagnostics
32
Advertisement
Table of Contents
