Advertisement
Installation Instructions for Electronic Stand-Alone Mortise Locks
Cover screws
Figure 18 Installing the top cover
10
Top cover
Inside of door
BEST ACCESS SYSTEMS
a Product Group of Stanley Security Solutions, Inc.
Completing the installation
18
Install top cover
(inside escutcheon)
1 Position the top cover above the fire plate and slide it
down over the guide notches on the fire plate.
Caution: Make sure that the top cover does not
pinch any wires as you slide it over the fire plate.
2 Use two cover screws to secure the cover to the side
of the fire plate, as shown in Figure 18.
Note: Phillips Type 2 and T20 Torx options are available
for the cover mounting screws.
Advertisement
