10.2.1.2.1 Image
The following figure shows the layout of the results page.
10.2.1.2.2 Setting Result
Items
"Restarting...
Restarting communication may
take a few minutes.
If you want to change the
settings, reconnect to the Web
Config."
"Setup failed."
"Cannot access the product
until processing is complete."
Figure 10-5 Image
Table 10-16 Setting Result
This message is shown when the settings are completed successfully.
This message is shown if setup fails.
This message is shown when the setting is unavailable because the product is
processing.
Setting Result
Description
50