Epson TM-P20II Reference Manual page 125

10.4.6.2.3.4 Result Page
The following result is shown in the main frame after the "OK" button is pressed.
The format of the indicated page is the same as "IPsec/IP Filtering > Importing for Client certificate".
10.4.6.2.3.4.1 Result
Items
"Setup complete."
"Shutting down."
"Restarting communication may take a
few minutes."
"If you want to change the settings,
close the Web Config and check your IP
address. Then enter your IP address in
the browser to restart the Web Config."
"Invalid password."
"Invalid file."
"Invalid date and time."
"The certificate has expired. Check if the
certificate is valid, or check the date and
time on the product."
"Cannot use the Client Certificates that
include more than three CA certificates."
"Private key is required."
"Setup failed."
"Setup failed."
"Click [Reboot Network] to apply the
settings."
"Communication will be shut down
temporarily."
"The setting may be applied to the
communication after other settings are
changed or the device is restarted."
Note: If the size of a certificate to be imported is larger than 24KBytes, the device is unable to read it and a Web browser error is
shown.
10.4.6.2.3.4.2 Button
Items
"Reboot Network"
Table 10-138 Result
Description
This message is shown when
importing is completed.
This message is shown when
importing and overwriting are
completed.
The network shuts down in order to
update.
This message is shown when the
entered password is invalid.
This message is shown in the
following cases.
- The file uses an incorrect format or
wrong interrelation.
- The file size is greater than the
stipulated range of 5k to 24k. (See
the note.)
- The private key and certificate do
not match.
- Incorrect chain.
This message is shown when an
expired certificate is imported, and
the date and time are not set.
This message is shown when an
expired certificate is imported, and
the date and time are already set.
This message is shown when a server
certificate that includes more than 3
CA-signed certs is imported in
PSCS#12.
This message is shown when a
private key is required.
This message is shown when
importing fails.
This message is shown when a
network reboot fails.
Table 10-139 Button
Description
Reboots the network
If the network reboot is successful, Web Config displays the
successful result page.
If the network reboot fails, Web Config displays the same
page.
Redirect Redirect
from from
Import Warning
Top Page Pop-up
Yes No
No Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No Yes
Condition
If the network reboot fails
Redirect
after
Pressing
Reboot
Network
Button
No
Yes
No
No
No
No
No
No
No
Yes
125