Table of Contents
Advertisement
Problem
Rattling sound when
dishwashing.
"Program paused" is shown on
the display.
Water remains in the dishwasher
above the filters.
Possible causes
The dishes are not correctly
placed or the spray arms are not
rotating.
The dishwasher door has been
opened while a program is in
progress.
The filters are clogged.
The filters are not fitted correctly.
Debris in the drain pump.
Drain pump stop missing.
Kink in drain hose.
Blocked drain hose.
Troubleshooting
Action
Check that the dishes are
placed securely. Spin the spray
arms to make sure they can
rotate.
If you want the dishwashing
program to continue, press
and close the door within four
seconds.
If you want to cancel the
dishwashing program, press
and hold
for three seconds.
Clean the coarse and fine filters.
Check that the filters are fitted
correctly. See the chapter Care
and maintenance instructions.
Clean the drain pump. See the
chapter Care and maintenance
instructions.
Check that the yellow drain
pump stop (on the right in the
bottom drain) is in place. See
the chapter Care and
maintenance instructions.
Check that the hose is free from
kinks and sharp bends.
Loosen the drain hose from
where it terminates. Check that
no debris has clogged the hose.
Is the cone-shaped part of the
drain boot cut to the maximum
size of the fitting where it
attaches?
45
Advertisement
Table of Contents
