Using Hdavi Control Tm; One-Touch Home Theater - Panasonic SA-XR58 Operating Instructions Manual

Using HDAVI Control
HDAVI Control
This convenient feature links control of your receiver and your other Panasonic home theater equipment. VIERA televisions and
DIGA DVD recorders connected with an HDMI cable can be controlled in this way. For details, refer to the operating instructions of
your other equipment.
Preparation
1. Connect your other Panasonic home theater equipment (HDAVI Control compatible VIERA television or DIGA DVD
recorder) with an HDMI cable (
(Cables that do not meet the HDMI specifications are not compatible with this feature. Use a Panasonic HDMI cable for best
results.)
2. Read your television's operating instructions and make the settings necessary to activate the HDAVI Control.
3. Switch on all your equipment, then switch your television off then on again and check that images from DIGA appear
correctly.
(Do this whenever you change connections or settings.)
TV HDMI
(AV IN)
TV (VIERA)
DIGITAL AUDIO
OUT (OPTICAL)
• To take advantage of the multi-channel sounds now available with digital television, use a digital connection if your TV has a digital output terminal.
RECEIVER
AV

One-touch Home Theater

SYSTEM
RECORDER
TV DVD
TUNER PLAYER
CD VCR DVD
BAND ANALOG 6CH
CH
VOLUME
0
DISC
-/--
DIRECT TUNING
SKIP SLOW/SEARCH
STOP PAUSE PLAY
DRIVE SELECT DVD RECORDER MANUAL SKIP
ENTER
Multi-channel audio for your VIERA
SUB MENU RETURN
• Connect your VIERA's digital output terminal to the DIGITAL IN OPTICAL 1 terminal on this unit (
• Refer to your VIERA's operating instructions and make the settings necessary to switch audio output from VIERA's speakers to
SUBWOOFER TV
speakers connected to this unit.
OFF
DIMMER
• The input source on this unit switches to "TV" if you select a channel or otherwise operate the television (
EFFECT VOL
LEVEL
To turn off HDAVI Control, "HDMI settings",
NEO : 6 TV/AV
SFC AUTO
MUSIC MOVIE TEST MUTING
TM
page 5).
➡
LOOP LOOP LOOP EXT EXT EXT LOOP ANT
GND
FM ANT AM ANT
DIGITAL IN
(TV/STB) (DVD RECORDER) (DVD PLAYER) (CD)
OPTICAL1 OPTICAL2 COAXIAL1 COAXIAL2
Point the remote control at your DIGA DVD recorder and press [ONE
TOUCH PLAY].
1. Your DIGA switches on. Play starts if there is a disc in the tray. If a disc is not in the tray, DIGA
plays the television program last recorded to the hard disk.
2. Your VIERA switches on and input switches.
3. This unit switches on, input switches to "DVR", and multi-channel play starts.
Press [+ VOLUME -] to adjust the volume.
You can also adjust the volume with VIERA's remote control.
(An indicator appears on the television showing that you are adjusting this unit's volume.)
If the beginning of the program is cut off, press [u SKIP] to skip back to the beginning.
For your reference
• If you switch your VIERA off, this unit also switches off (unless you have changed the input source to
"TUNER" or "CD").
• VIERA's speakers start to output the audio instead if you switch this unit off. If you then switch this unit on
again, audio output switches back to this unit.
• If this unit is off and you switch the setting on your VIERA so that audio is output from a connected receiver,
this unit switches on and starts to output the audio.
page 29.
➡
Rear panel
OUT (DVD RECORDER) IN
S VIDEO
OUT IN IN IN OUT IN
TV MONITOR DVD PLAYER DVD RECORDER TV/STB TV MONITOR DVD PLAYER
DVD HDMI
DVD recorder
(AV OUT)
(DIGA)
page 9).
➡
page 34).
➡
21
RQTV0156