JVC LT-37M60ZU Manual page 35

Problem
Remote control
stops working
Aspect ratio changes
unintentionally
Black or white dots
appear on the screen
Poor picture quality
Strange picture
when using an external
device
When a media card is inserted into the TV, remove the card
fi rst. Then, unplug TV, several minutes later plug it in again.
Press to return to your settings.
LCD panels use fi ne dots ("pixels") to display images.
While more than 99.99% of these pixels function properly,
a very small number of pixels may not light,
or may light all the time.
Please understand that this is not a malfunction.
Unnatural colour >>> Adjust COLOUR and BRIGHT-1.
Check your COLOUR SYSTEM.
Noise >>> Set to the following functions.
PICTURE MODE : STANDARD
DIGITAL VNR : AUTO (HIGH)
Super DigiPure : MIN
Dull picture >>> Set to the following functions.
PICTURE MODE : BRIGHT
DIGITAL VNR : MIN
Super DigiPure : MAX
If you connected S-Video output device, check the
"S-IN" setting.
If the top of the image is distorted, check the video
signal quality itself.
If movement appears unnatural when receiving a signal
from a DVD player, etc. with 625p (progressive-scanning),
change the output setting of the external device to 625i
(interlace-scanning).
Actions page
-
17
-
30
32
30
31
31
30
31
31
22
-
-
34